Canobeam DT-100 Series Canon launches a new lineup of CANOBEAM optical-beam transceivers with low-cost, high-speed models. TOKYO, June 11, 2003,Canon announced the introduction of three new optical transceivers that enable the creation of a bi-directional wireless connection for high-speed low-cost data transmission : the Canon CANOBEAM DT-110 and DT-120, realizing transfer speeds up to 156Mbps; and the CANOBEAM DT-130, allowing data transfer at an exceeding 1.25Gbps. Canon's CANOBEAM DT-110, DT-120 and DT-130 optical transceivers build on the outstanding functionality of previous models, employing design innovations that contribute to both reduced size and greater cost performance. Featuring a compact optical module, which integrates key optical components in one tidy unit, the models utilize fewer parts to realize size and weight reductions of up to 50% (*1). Now, Canon is proud to announce the NEW DT-150, our latest Canobeam series for digital video signal transmission. DT-150 transmits both HDTV and SDTV digital video formats (HD-SDI, SD-SDI, and DVB-ASI). Taking advantage of its super fast data transmission speed of 1.485Gbsp, DT-150 transmits the HDTV video format (HD-SDI) without compression and thus the transmitted picture quality has no loss and has no frame delay. Each of the models also includes the acclaimed Autotracking function, which automatically maintains the alignment of the laser axes of the paired transceiver units to compensate for shifting and vibrations experienced by buildings or other platforms as a result of temperature changes, wind and other environmental conditions. The Autotracking function also features a new design that further contributes to the units' reduced proportions. CANOBEAM DT-110 TYPE SFP   The CANOBEAM DT-110 is a high-cost-performance model for short distance applications. The model achieves bi-directional transmission over distances ranging from 20 to 500 m (*2) at speeds from 25 to 156Mbps, also offers Autotracking : a feature previously limited to high-end models. CANOBEAM DT-120 TYPE SFP   The CANOBEAM DT-120 is a standard model that makes possible data transmission over distances from 100 m to 2 km (*2) at speeds up to 156Mbps. The DT-120 also offers a network-based device-monitoring system, which allows network administrators to set and confirm all settings remotely, drastically reducing time spent on maintenance. CANOBEAM DT-130 TYPE SFP   The CANOBEAM DT-130 is an ultra-high-speed model that achieves transfer speeds of up to 1.25Gbps, supporting network delivery of large-volume data. Enabling transmission over distances from 20 m to 1 km, the DT-130 also incorporates a 3R Function (Re-shaping, Re-timing, and Re-generating), allowing the data signal to be relayed without loss of strength or quality even when operating at maximum transfer speed. CANOBEAM DT-150   The CANOBEAM DT-150 is a video transmission model thattransmits digital video formats (HD-SDI/SD-SDI/DVB-ASI). The DT-150 realizes a super fast transmission speed of 1.485Gbps over distances from 200m to 1000m. *1 Approximately 50% for DT-120 and DT-130 *2 Assumes a data-transfer capacity of 99.5% or greater. Transmission distances may vary according to such factors as location and weather Specifications DT-100 Series DT-110 Type SFP DT-120 Type SFP DT-130 Type SFP DT-150 Applications SDH/ATM/FDDI/Fast Ethernet Gigabit Ethernet HD-SDI/SD-SDI/DVB-ASI Standard Transmission Distance (*1) 20~500m 100~2000m 20~1000m 20~1000m Data Transmission Speed 25~156Mbps 25~156Mbps 1.25Gbps 1.485Gbps 1.485/1.001Gbps, 270Mbps (*2) Transmission Device Laser Diode Laser Wavelength 785±15nm Laser Output Power Approx. 7mW Approx. 11mW Safety Class of Laser Class 1M Receiving Device Si PIN-PD Si APD Auto Tracking Adjustment Horizontal: ±1.2° Vertical: ±1.2° 3R Function — — Yes Yes Media Interface SEP SLOT ×1 Console Port RS-232C(DSUB-9Pin), 10Base-T(RJ-45) Operation Temperature Range -20°C ~ +50°C Power AC100-240V 50/60Hz (DC-48V optional) Power Consumption Approx. 20W Installation Environment Indoor or outdoor (Weatherproof : IP56) Dimensions 246(W) x 168(H) x 487(D)mm Weight Approx. 8Kg (*1) Above values are calculated under conditions of more than 99.5% reliability based on actual visibility data in Tokyo, Japan. Longer transmission distances can be achieved but this is a function of weather conditions and acceptable link availability (*2) This model is not compliant with SDI Check Field Signals (pathological signals) Optional SFP Module Model Name DT-SFPMM DT-SEPSM DT-SFPSX DT-SEPLX DT-SEPHD DATA Transmission Speed 25~156Mbps 25~156Mbps 1.25Gbps 1.25Gbps 1.485Gbps, Speed 1.485/1.001Gbps, 270Mbps Applicable Model DT-110, DT-120 DT-130 DT-150 Transmission Device LC connector Type of Cable Multi-Mode Fiber (MMF) 62.5/125µm or 50/125µm Single-Mode Fiber (SMF) 9 10/125µm Multi-Mode Fiber (MMF) 62.5/125µm or 50/125µm Single-Mode Fiber (SMF) 9 10/125µm Single-Mode Fiber (SMF) 9 10/125µm Multi-Mode Fiber (MMF)(*2) 62.5/125µm or 50/125µm Maximum Length of Cable 2km 15km 220m (MMF 62.5/125µm) 10km (SMF 9 10/125µm) 10km 500m (MMF 50/125µm) 550m (62.5/125µm or 50/125µm) Applications SDH/ATM/FDDI/Fast Ethernet (*1) (100Base-FX) Gigabit Ethernet (1000Base-SX) Gigabit Ethernet (1000Base-LX) HD-SDI SD-SDI, DVB-ASI (*1) Fast Ethernet requires 100Mbps fixed Full Duplex interface. (*2) Please use mode conditioning patch cord with multi-mode fiber. Dimensions (DT-110/120/130/150) TOP