Table 4 Personal Functions of the EOS-1D Mark II and the EOS-1Ds Mark II

The personal functions can be set from a PC screen with the provided software program, then registered in the camera. These functions can be turned ON/OFF with the camera.
P.Fn-No. Description
00 Custom Function group registration
01 Disables the shooting modes
02 Disables the metering modes
03 Specifies the metering mode for manual exposure
04 Sets the maximum and minimum shutter speeds to be used
05 Sets the maximum and minimum apertures to be used
06 Registers and switches the shooting mode and metering mode
07 Repeats bracketing during continuous shooting
08 Sets the number of shots to be bracketed
09 Changes the bracketing sequence for C.Fn-09-2/3 to increased exposure, standard exposure, and decreased exposure
10 Retains the shift amount for program shift
11 (Unused)
12 (Unused)
13 (Unused)
14 Disables focus detection (search driving) by the lens drive
15 Disables the AF-assist beam
16 Enables automatic shooting when focus is achieved at the fixed point of focus while the shutter button is pressed fully
17 Disables automatic AF point selection
18 Enables automatic AF point selection when C.Fn-11-2 has been set
19 Sets the continuous shooting speed
20 Limits the number of shots during continuous shooting
21 Enables quiet operation when the shutter button is OFF after shooting
22 (Unused)
23 Changes the operation timer's time length
24 Keeps the LCD panel illuminated during bulb exposures
25 Sets the default settings when the CLEAR button is ON
26 Speeds up the shutter-release time lag
27 Enables the electronic dial's function to be used in the reverse direction
28 Prevents exposure compensation from being set with the Quick Control Dial
29 (Unused)
30 The Quick Control Dial's ON/OFF switch also applies to the Main Dial
31 Adds original image verification data